WANTED TRAINING CONSULTANTS

The CTI, Chennai has advertised for Junior Consultants whose pay will be a consolidated amount of Rs. 18000/- p.m. the persons who have interest to teach and train craft instructors in various I.T.I. trades can apply. For details visit:ctichennai.in

CENTRAL TRAINING INSTITUTE IN CHENNAI

ABOUT THE INSTITUTE

            Central Training Institute for Instructors was established in November, 1962 under the aegis of National Council for Vocational Training (NCVT), DGE&T, Ministry of Labour and Employment, Govt.  of India, New Delhi with the assistance of ILO to train Vocational Instructors for Industrial Training Institutes/Centres.  Subsequently Model Training Institute was also created in February 1965 to enable instructor trainees to have practice teaching.

            Presently the institute has been identified to train the craft instructors required for Centre Of  Excellence (COE) under the World Bank assisted “Vocational Training improvement Project”

            The Institute is located at Guindy, in the heart of Chennai city, adjacent to GST Road, Guindy Industrial Estate and opposite to Guindy railway station.  The institute is 5 kms from the Chennai Airport and well connected by Road and Rail from other parts of the country. 

 

CRAFT INSTRUCTOR TRAINING PROGRAM

OBJECTIVES:

To train Vocational Instructors in the areas of Training Methodology, Learners psychology, Workshop Administration, Records management, Use of Audio Visual Aids and to achieve technical competence in their respective trades.

TARGET GROUPS:

            Technical teachers, Instructors, Trainers deputed by State Govt. I.T.I s, Private I.T.Cs, Industries and also private candidates.

            Foreign Nationals working as Technical teachers, Instructors and trainers etc under Commonwealth educational Cooperation Plan sponsored by Indian Council of Cultural Relations. 

 

MODULAR PATTERN OF INSTRUCTOR TRAINING

Under this pattern four modules of Training, each for a duration of three months are given as mentioned below:

MODULE	QUALIFICATION	DURATION
Trade Technology -I	A Pass in Matriculation and  Diploma in the relevant field training/NAC/NTC	3 Months
Trade Technology –II	-Do-	3 Months
Engineering Technology	A Pass in Matriculation and  any Diploma in Engineering/NAC/NTC	3 Months
Training Methodology	-Do-	3 Months

Trade Technology 

This is divided into two modules namely Trade Technology –I and Trade Technology –II. Trade Technology modules are available only for Fitter, Turner, Machinist, Electrician, Mechanic (Motor Vehicle), Mechanic (Diesel),  Welder (Gas & Electric), Draughtsman (Civil) and Foundryman trades.

Engineering Technology

 -          available for all vocational trades.

Training Methodology

This module is also called as Principles of Teaching and available for all vocational trades.

Entry Level Requirements:

1.      A pass in Matriculation or equivalent examination.

2.      Diploma in Engineering relevant to the trade or National Apprenticeship Certificate in respective trade or NTC with one year experience in a reputed industry or training organization.

3.      Age between 18 and 40 years.

  

MODE OF ADMISSION:

            The Admission notification will be published in the Employment News’ weekly during May/June every year.  Applications can be had from the Principal, Central Training Institute for Instructors, Guindy, Chennai-32 on payment of prescribed fees.In the modular pattern of instructor training, the twelve months duration has been divided into four modules of each three months duration

, A candidate can seek admission to any one of the three modules i.e., Trade Technology –I, Engineering Technology, Training Methodology at the time of admission. To get admission to the Trade Technology –II module, a candidate should have passed module Trade technology –I. All the four modules are to be completed within a period of five years from the date of joining to the first module.  Candidates can resume subsequent modules at any other Advanced Training Institutes of DGE&T located in Ludhiana, Mumbai, Hyderabad, Howrah and Kanpur according to the availability of trades and vacancies.

CRAFT INSTRUCTOR COURSE 2012 AT CHENNAI

CRAFT INSTRUCTOR COURSE (CTI) AT CHENNAI 2012

Application for Admission to one year Crafts instructor course at Central Training Institute is advertised in “The Hindu” dated 3^rd June 2012. Courses are conducted in Fitter, Machinist, Turner, Welder(Gas & Electric), Electrician, Mechanic (Diesel), (Mechanic Motor Vehicle), Foundry man, Draughtsman (Civil), Electronic Mechanic, Mechanic (Machine Tool Maintenance), Tool& Die Maker, Plumber, Carpenter, Mechanic (Refrigeration & Air-conditioning.

For application and details please look at the web site:http://www.ctichennai.in/

Or write to

The Prinicipal, Central Training Institute, CTI campus, Guindy, Chennai -600032

Or

Send e-mail to:  ctiadmission@gmail.com

Admission to I T I courses in Chennai, Tamil Nadu

ADMISSION TO I.T.I. COURSES IN CENTRAL TRAINING INSTITUTE GOVT. OF INDIA, CHENNAI
Admissions are going on in Central Training Institute for Instructors, Guindy, Chennai -600032 for trade certificate courses awarded by NCVT of Indian Government. The following courses are taught in this institute.
1. Machinist ( 2 years ) – A pass in 10th standard
2. Fitter ( 2 years ) – A pass in 10th standard
3. Turner ( 2 years ) – A pass in 10th standard
4. Electrician ( 2 years ) – A pass in 10th standard with science and mathematics
5. Electronic Mechanic ( 2 years ) – A pass in 10th standard
6. Carpenter ( 1 year ) – Eighth standard pass
7. Welder ( 1 year ) Eighth standard pass
8. Foundry man( 1 year ) Eighth standard pass
9. Cutting & Sewing ( 1 year ) Eighth standard pass
10. Mechanic (Diesel) – A pass in 10th standard
11. Computer Operator and Programming Assistant ( 1 year ) - +2 pass
The institute is run by Government of India, trainees are given stipend scholarship and other concessions as per govt. rules.
For applications and details contact:
The Principal, Central Training Institute, Guindy, Chennai -32, Tamil Nadu
Phone no. 044-22501593, 044-22500437
Or send e-mail to get application via e-mail: e-mail Id. ctichennai@gmail.com

CRAFT INSTRUCTOR TRAINING AT CHENNAI

THE FOLLOWING EXCERPTS ARE GIVEN FOR THE CRAFT INSTRUCTOR ASPIRANTS.TRAINING OF CRAFT INSTRUCTORS – ADMISSION FOR THE YEAR-2010

The admission for the craft instructor training course (Modular pattern) at CTI Guindy, Chennai-32 will commence as per the following schedule for the year 2010-11.
I quarter II Quarter III quarter IV Quarter
2nd August 2010 1st November 2010 1st February 2011 2nd May 2011

The various Modules of Instructor Training (Modular Pattern) with their duration eligibility and commencement are given below. Training Methodology and Engineering Technology modules are offered in all the Trades. Modules on Trade Technology -I and Trade Technology -II are offered in the following Trades only.
1. FITTER 2. TURNER 3. MACHINIST
4. WELDER (GAS & ELECTRIC) 5. ELECTRICIAN 6. MECHANIC (DIESEL)
7. MECHANIC (MOTOR VEHICLE) 8. FOUNDARY MEN 9. DRAUGHTSMAN (CIVIL)
10.ELECTRONIC MECHANIC 11.MECH.MACHINE
TOOLS MAINTENANCE 12.TOOL & DIE MAKER(PRESS
TOOLS, JIGS & FIXTURES
13. PLUMBER
6. HOW TO APPLY: candidate seeking admission should apply to the Principal, Central Training Institute, Guindy Chennai, 600032, in the prescribed application format with a passport size photo along with a Registration fee of Rs.100/-. by way of Indian Postal Order or Demand Draft in favor of PAY & Accounts Officer, PAO Chennai 32, payable at Chennai. The format of application form can be obtained from the advertisement or on request e-mail to ctiadmission@gmail.com.
Last Date for Receipt of the filled in application for admission to the following quarters are
I quarter II Quarter III quarter IV Quarter
25-06-2010 24th September 2010 24th December2010 25h March 2011

Last Date for Receipt of the filled in application for admission to the following quarters are
I quarter II Quarter III quarter IV Quarter
25-06-2010 24th September 2010 24th December2010 25h March 2011
Last Date for Receipt of the filled in application for admission to the following quarters are
I quarter II Quarter III quarter IV Quarter
25-06-2010 24th September 2010 24th December2010 25h March 2011

Last Date for Receipt of the filled in application for admission to the following quarters are
I quarter II Quarter III quarter IV Quarter
25-06-2010 24th September 2010 24th December2010 25h March 2011

FOR OFFICE USE ONLY
30% Xth (1) 05% XIIth ( 2) 05% Degree(3) 50% NTC (4) 60%NAC (5) 60%Diploma (6 ) Total 100% (*)


* 1+2+3+ (4 or 5 or 6) Registration No

APPLICATION FOR ADMISSION IN CRAFT INSTRUCTOR COURSE
(To be filled by the candidate)
PHOTO


1) Name in full (IN BLOCK LETTERS):




2) Date of Birth:


3) Nationality:

4) Father’s/Husband’s Name:


5) Residential Address:

Door No.: Name of the Street: Village /Area

District : City State

PIN Code: Contact Cell Phone No. E-mail

6) SEX : Male/ Female


7) Whether belongs to SC/ST/PH/EX/Category: YES / NO, If YES
(Certificate to be enclosed)

8) Details Previous Modules Completed:

Name of the Module
completed Month and Year
Result
Pass / Fail Admission No Name of the institution
& place
Training Methodology
Engg.Technology
Trade Technology -1
Trade Technology -2


9) Module for which admission is required:
(Refer prospectus for details)

10) Date of commencement of course
(Refer prospectus for details)

11) Qualification
a) Academic :
Sl.No Examination Passed University/Board Year Class % of Marks Main Subject
Xth
XII
Graduation
(Attested Photostat copies of mark sheets, to be attached)

b) Technical:
Sl.No Certificate/
Diploma Trade/ Branch Institute attended Year of passing %
of Marks Remarks
1 NTC
2 NAC
3 Diploma
(Attested Photostat copies of mark sheets, to be attached)

12) Payment Details of Registration Fee.

IPO / DD No.
Date
Amount
Name of the Bank/Post Office
13) Any other Particulars :

I certify that the information given in item 1 to 13 is correct to the best of my knowledge and belief. In the event of my selection for admission to the institute, I undertake to abide by the rules and regulations and discipline of the institute



Date:
Station: Signature of the Candidate


Last Date for Receipt of the filled in application for admission to the following quarters are
I quarter II Quarter III quarter IV Quarter
25th June 2010 24th September 2010 24th December2010 25h March 2011